C-Head with very wide crimping range to 400mm2
All tool data at a glance, thanks to the display
One-button operating concept for controlling all tooling functions
Led for workplace illumination
Open head, rotatable
Double speed hydraulic system, 2 year warrant for tool
1. All tools can be controlled by one key-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
2. LCD Data Display-The Total Crimping Times, Electricity Power, Errors Info can be checked by the Display, also we can special making for customer to show the pressure if necessary.
3. Air Cooling Heat dissipation system to extend using.
4. Heads Rotates 350 degree in order to gain better access to tight corners or other difficult working areas.
5. Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles copare to NiMH batteries.
6. The unit is equipped with a double piston pump which is characterised by a rapid approach of the dies forwards the connector and a slow crimping motion
7. USD connect to memory crimping time
Item No: BZ-400
Voltage of battery: 18V
Voltage: 100-240V AC
Package: Plastic box
CRIMPING DIES 16,25,35,50,70,95,120,150,185,240,300,400MM2
sealing ring of cylinder: 1set
sealing ring of safety valve: 1set