Product details
OptiStar CG07 Gun control unit
Electrical data
Mains input voltage |
100-240 VAC |
Operating frequency |
50-60 Hz |
Input power |
40 VA |
Nominal output voltage (to the gun) max. |
12 V |
Nominal output current (to the gun) max. |
1 A |
Ambient temperature range |
0°C - +40°C(+32°F - +104°F) |
Max. operating temperature |
85°C (+185°F) |
Pneumatical data
Compressed air connection |
1/4" male quick release |
Input pressures (must be set in the software) |
5,5 bar |
Max. input pressure |
10 bar / 145 psi |
Min. input pressure (while unit in operation) |
6 bar / 87 psi |
Max. water vapor content of the compressed air |
1.3 g/m³ |
Max. oil vapor content of the compressed air |
0.1 mg/m³ |
OptiStar CG07 Gun control unit - inside rear wall
1 Pneumatic group - complete 1001 029
2 Throttle motor - completely assembled 1000 064
3 Main solenoid valve cable - CG07 1001 410
4 Spring washer - M3 R 201 880
5 Hexagon nut - M3 202 142
6 Cylinder screw - M3x16 mm 221 074
7 Screw-in nipple - 1/8", Ø 6 mm, OR 262 315
8 Fluidizing pad - 1/8" A 237 264
OptiStar CG07 Gun control unit - outside rear wall
OptiStar rear wall - complete 1000 063
1 Rear wall 1000 067
2 CG07 vibrator connection, assembled 1001 177
3 Milled nut - M6 200 433
4 Hose connection - complete, Ø 6/4 mm 1001 520
5 Hose connection - complete, Ø 8/6 mm 1001 519
6 Rectus quick release connection - complete 1001 517
7 Gun connection CG07, assembled 1001 179
8 Mains connection CG07 1001 176
9 Cap screw - M3x8 mm 202 363
10 Cap screw - M3x12 mm 216 747
Shock protection (is fixed on the rear wall, not shown) 1001 058
11 Fixing screws for shock protection (2 pieces) - M5x12 mm 216 348
12 Corona/Tribo adapter 1001 869
Protection cap for 2.2 Aux connection (not shown) 206 474
Connecting cable (power supply) for 2 control units operation (not shown) 1001 867
OptiStar CG07 Gun control unit - front plate
Front plate - complete 1000 395
1 Front plate with foil keyboard 1000 394
2 Front shield - complete 1000 528
3 OptiStar mainboard V1.0 - complete, with display 1000 875
4 Locknut - M3 262 498
5 Washer - Ø 3,2/7x0,5 mm 201 944
6 Standoff - Ø 3,2/6x6 mm 1001 925
7 Standoff - Ø 3,2/6x15 mm 1001 926
8 Compression spring - 0,5x6,3x13,5 mm 230 251
9 Special screw 1000 400
Find excellent quality parts of control unit cg07 from one of the largest manufacturers and suppliers - GALIN, which has been dedicated to this field for years. Leveraging on advanced equipment and superior techniques, we can offer you parts of control unit cg07 with high accuracy, high efficiency, reliable performance and long lifespan. Welcome to buy or wholesale our delicate products.